If the timer malfunctions, your Maytag front load washer won’t start on command. Timer: The timer controls all washer functions so they can start at the proper time.Before replacing the fuse, check for common causes of overheating, such as shorted wires, to prevent it from blowing again. The washer won’t start again until the fuse is replaced. Blown line fuse: To protect vital components, the line fuse blows if the washer circuits overload with power.Defective user control panel: If the washer has power but some control panel buttons work while others don’t, the panel is likely defective and requires replacement.The following malfunctions can prevent an immediate start and require a professional washing machine repair: If all else fails, a Maytag washer not starting on command may be due to a part failure. It’s necessary to hold the Start button down for 3 seconds to begin a wash cycle. Lastly, if you find your Maytag washing machine start button not working, make sure you’ve held it down sufficiently. Refer to your user manual to determine the meaning of the code and how to solve the designated issue. It’s also a good idea to check the control panel for error codes that could indicate a problem. To turn off the Delay Start function, simply turn the washer off and turn it back on. On some model washers, you can tell this function is activated if the Delay Indicator display is counting down. If a setting like Delay Start is enabled, the washer won’t start immediately and will instead begin washing at a preselected later time. Check Washing Machine Settingsīefore starting your washer, always check the control panel to make sure it’s on the right setting for your wash load. If the latch shows visible damage or fails multimeter testing with a lack of continuity, it should be professionally replaced. If no obstructions are visible, that latch that secures the door and signals the washer to start may be defective. Always close the door firmly and allow 10 seconds for the latch to engage.Ĭheck the door for trapped clothing that may prevent it from closing completely. As a safety precaution, the washer won’t start if the door isn’t properly shut and latched. When your Maytag washer turns on but won’t start there may be a problem with the door closure. LoC or LC should disappear from the control panel and all washer functions should resume. Holding down the correct key(s) for 3 seconds disengages the Control Lock feature. Some have a dedicated key for this function while others require you to hold down two keys simultaneously. When Control Lock is activated, the letters LoC or LC will illuminate on the control panel.Ĭonsult your user manual to determine how to disable the Control Lock feature on your model washer. This setting locks all control panel functions to prevent an accidental start. Is your Maytag washer locked and won’t turn on? The Control Lock feature may be enabled.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |